PCL Sand Making Machine

PCL Sand Making Machine: a.Alloy blade in hammer, extend the useful life b.Automatic-lift cover c.Good Lubricant system Why Customers Choose LongzhenPCL Sand Making Machine AdvantagesWith alloy blade in hammer, extend the useful life.Lubricant system, solve the lock problemof main shaft.With the feed channel, organizable, adjustable.Automatic-lift cover, easy maintenance. PCL Sand Making Machine Introduction:

Longzhen PCL sand making machine is the advanced, the third generation and the forth generation machine, onlyone machine has the capability of crushing and milling together, can process all most hard, high-wear and sticky materials, the structure of the machine is original, stable operation, high capacity, little cost and pollution, easy maintenance.

Longzhen PCL sand making machine has the priority capability of making stone good form, all the end product can been formed below 5% content of the chip, the grain is better than the impact crusher.

Longzhen PCL sand making machine makes use of the technology of the `no contacting and disparting crushing principle, and develops the special wear materials, makes the cost of the quick wear parts low., And adjusts the structure of the machine according to the clients requirement of the end product of hardness, capacity, size and rate. The machine has been used widely in the field of the water power, highway, architect, cement, silicon and ore sand industry.

PCL Sand Making Machine Working Principle:

PCL sand making machine is mainly consistent of feed tube, impeller, and distribution cone. During operation, its two motors drive the impeller to turn round. The speed of impeller will arrive at 75 meter/second. Therefore, as one part of the materials are divided by the feed tube and directly entering into the rotating impeller, they will fly away from the three runner plates of the impeller. the materials will impact with some materials falling around classifier, then impact on the whirlpool cavity's scale board together, then will be rebounded and impact on the top of whirlpool cavity, then changes its direction and goes down, forms continual material layers with the materials shot from the impeller.

Through this way, the materials are all crushed for several times at high speed and with hard crushing plates. And finally the crushed materials will be exhausted from the distribution cone at the bottom. In the whole crushing process, the materials shock, crush and smash with each other, not directly impacting with the machines.

Therefore, the powder in the end product is reduced, the work life of the machines wearing part is extended, the pollution to the environment is decreased and the materials can be crushed into 20 meshes with perfect shape. Airflow self-circulation in the whirlpool cavity can well eliminate the dust pollution.

PCL Sand Making Machine Detail Data:

Model	Max feed size mm	Power kw	Rotation speed r/min	Capacity t/h	Weight t	Overall dimension L*W*H mm
PCL-600	30	60-90	1500-2200	20-80	5.6	3300×1500×2050
PCL-900	40	110-220	1000-1450	90-150	13.6	3600×2140×2620
PCL-1250	50	264-320	900-1300	150-300	19.8	4520×2640×3540
PCL-1350	60	400-600	800-1300	200-400	26	4800×2800×3600

PCL Sand Making Machine